Binks®™ Groove Tip
These Binks®™ air-assisted airless groove spray tips are used with air-assisted airless gun models AA1500M, AA1600M, AA4400M and AA4400A. With our large selection of paint sprayer tips, you will always achieve a soft spray atomization in a wide number of spray patterns and orifice combinations when the correct air-assisted airless paint filters are administered. Whether you require our standard or fine finish pre-atomizer versions for your air assisted airless paint sprayer, you can find the right paint spray tips to solve all your fluid handling needs.
Applying the spray coating at significantly lower pressures than a normal airless setup, your air-assisted airless spray equipment will undergo less wear and tear. By adding a small amount of air to aid in completing the pattern formation, you are able to obtain the fine finish results required while greatly reducing excessive bounce back of the spray coating; ultimately, resulting in less maintenance and clean up of your air-assisted airless spray equipment allowing it to last longer. Additional Binks®™ air-assisted airless paint sprayer tips are available upon request and Binks®™ 1/8” ID air-assisted airless high-pressure flexible hose in stock.
| Tip Size | Degree | Orifice Size | Fan Pattern |
| 211 | 20 | 0.011 | 4-6 inches |
| 213 | 20 | 0.013 | 4-6 inches |
| 309 | 30 | 0.009 | 6-8 inches |
| 311 | 30 | 0.011 | 6-8 inches |
| 313 | 30 | 0.013 | 6-8 inches |
| 315 | 30 | 0.015 | 6-8 inches |
| 409 | 40 | 0.009 | 8-10 inches |
| 411 | 40 | 0.011 | 8-10 inches |
| 413 | 40 | 0.013 | 8-10 inches |
| 415 | 40 | 0.015 | 8-10 inches |
| 511 | 50 | 0.011 | 10-12 inches |
| 513 | 50 | 0.013 | 10-12 inches |
| 515 | 50 | 0.015 | 10-12 inches |
| 517 | 50 | 0.017 | 10-12 inches |
| 611 | 60 | 0.011 | 12-14 inches |
| 613 | 60 | 0.013 | 12-14 inches |
| 713 | 70 | 0.013 | 14-16 inches |
| 715 | 70 | 0.015 | 14-16 inches |
| 717 | 70 | 0.017 | 14-16 inches |
| 815 | 80 | 0.015 | 16-18 inches |
NOTES:
These are aftermarket SAMES-KREMLIN®TM, Graco®TM, and Binks®TM spray equipment parts that replace the OEM parts, not made by SAMES-KREMLIN®TM, Graco®TM, or Binks®TM.
Total Finishing Solutions, LLC is not affiliated with or authorized in any way by SAMES-KREMLIN®TM, Graco®TM, or Binks®TM, and replacement parts for SAMES-KREMLIN®TM, Graco®TM, and Binks®TM brand equipment are not manufactured or warranted by SAMES-KREMLIN®TM, Graco®TM, Binks®TM or any of its affiliates.