TFS Label Air-Assist-Airless (AAA) 14:1 Peak™ Pump - Wall Model Set-Up (V Packing) with MAMBA® AAA Spray Gun
Spray Pack
TFS Label Air-Assist-Airless (AAA) 14:1 Peak™ Pump - Wall Model Set-Up (V Packing) with MAMBA® AAA Spray Gun
Manufacturer: Wagner
Part Number: TFSC14WALL-MAMBA-XXX
Description:
AIR-ASSIST WALL MOUNT OUTFIT 1/2" INLET 5 GAL SIPHON
The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications. The new 14:1 Peak™ Performance Series pump incorporates a new completely redesigned air motor that features a stationary magnet poised for endurance and longevity. This simple direct-acting valve is also resistant to icing, has a long-life carbon fiber cylinder, and integrated noise suppression design for quiet operation. The fluid section is all stainless featuring a non-contact pump tube that never wears out. Also featured is a cartridge-style piston seal and guide for quick field replacement. The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation.
The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US.
Specifications:
- The pump offers a .33 GPM output for quick product changes with very little waste
- The New 14:1 Peak™ Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity
- The simple direct acting valve is also resistant to icing
- Has a long life carbon fiber cylinder and integrated noise suppression design for quiet operation
- The fluid section is all stainless featuring a non-contact pump tube that never wears out
- The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation
- The upper seal is a V-Packing design for pre-cat lacquers, conversion varnish, and polyurethanes
- Low 6 CFM air consumption
- 25 ft. x 3/16 in. Fluid Hose
- 25 ft. x 1/4 in. Air Hose
- Stationary magnet design
- The enclosed solvent cup eliminates environmental contamination.
- Sight gauges make it easier for checking and refilling lubricant levels.
- 5 Gallon Siphon Hose
This $124.00 packing upgrade is included in our pump packages. It also has a flexible 5-gallon pick-up tube with a nylon inlet filter. Call for an optional 55-gallon pick-up tube.
Hopper Option Available Here.
PROUDLY MADE IN USA.
Pump Operators Manual Cut Sheet
Accessory & Replacement Part List:
- Wagner Fluid/Air Hose Set 2309xxx
- C.A. Technologies Repair Kit -- Air Motor (Peak™ AAA) 10-163
- C.A. Technologies Repair Kit -- 14-1 Fluid Section 10-117
- Inlet Strainer Screen, 3/8" 74-560-P
Pumps are built to order and can take up to 10 days to ship.
Manufacturer: Total Finishing Supplies
Part Number: Mamba
Description: The MAMBA® Mix Tech 200 bar (2900PSI) manual spray gun delivers exceptional performance, value, and finish quality. With a high transfer efficiency, the MAMBA® Mix Tech competes with other much higher-priced Graco® G40 RAC™ and G15 RAC™ spray guns.
Features:
-
Material savings & environmental protection
-
MAMBA® is manufactured by an ISO9000 facility
-
HVLP compliant
-
Unsurpassed atomization and quality of spraying at almost half the price
-
Lightweight and ergonomic design for outstanding performance.
-
Comparable to Graco® G40 RAC™ and G15 RAC™ along with the TriTech Fine Finish Reversible Tips
Reasons to choose the TFS MAMBA® over any other Air Assisted Airless (AAA) on the market:
-
You have high standards and like saving money! MAMBA® Mix Tech delivers Top tier performance at a mid-market price while offering rugged durability and superior atomization.
-
Get more done with less coating and waste! High Transfer Efficiency for Air Assisted Airless! Testing has shown this gun to have 86% transfer efficiency.
Specifications:
Fluid Inlet: NPSM 1/4"
Compressed Air Connection: NPT 1/4"
Max. Material Pressure: 200 bar / 2,900 psi
Max Material Pressure: 131°F (55°C)
Max Inlet Pressure: 8 bar / 116 psi
Operating Temperature Range: 41°–104°F (5°–40°C)
Weight: 1.3lb (0.6kg)
Max Sound Level: 82dB(A)
Literature
- Operating Manual
- Brochure
- Cut Sheet
- Tip Chart
Accessory and Parts List
- Hopper
- TriTech Contractor Tips
- TriTech Ultra-Finish Tips
- Reversible Tip Guard and Retainer/Air Cap
- Non-OEM Tip Sieve Support
- Non-OEM Tip Sieves (85-200 mesh)
- 1/4" M x 1/4" F Swivel
- 25' High-Pressure Fluid Line (select fittings when ordering)
- 25' Air Line
Replacement Part List
- Reversible Tip Guard and Retainer
- Reverse Tip, Ultra Finish
- 2. Wedge
- 3. Fan Regulation Set
- 4. Pressure Wedge
- 5. Fluid Needle Gasket
- 6. Fluid Needle Screw
- 7. Air Valve Complete
- 8. Needle Set
- 9. Air Valve Spring
- 10. Needle Spring
- 11A. Back Cap
- 12. Air Inlet 1/4"
- 13. Pin
- 14. Safety Lock
- 15. Trigger Pin
- 16. Trigger
- 17. Sealing Gasket
- 18. Gun Head
NO DISCOUNT CODES may be applied to this item
NOTES:
Not made by Graco®
Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Graco Inc. and is not one of their authorized distributors. Aftermarket non-oem replacement parts comparable to Graco® brand equipment are not manufactured or warrantied by Graco Inc. or any of its affiliates.
Click here to view other products, parts, & accessories!