Tsunami Water Separators

Tsunami Water Separators

Manufacturer:  Tsunami

Part Number: 21999-0390, 21999-0390-ED, 21999-0390-MM, 21999-0960-MM, 21999-0960-ED, 21999-0960, 21999-1120-MM, 21999-1120-ED, 21999-1120, 21999-1096-MM, 21999-1096-ED, 21999-1096, 21999-0082-MM, 21999-0082-ED, 21999-0082, 21999-1034-MM, 21999-1034-ED, 21999-1034, 21999-0131-MM, 21999-0131-ED, 21999-0131

Description: 

The Tsunami Water Separator is a high-quality filtration product that removes dirt, particulate, and water from compressed air systems. The Tsunami Water Separator uses a unique up-flow gravity separation process to remove water droplets and aerosols from the air before being discharged through an automatic drain.

Drain Options

• Float Drain - Contains a float within the device that normally seats on a small orifice. When liquid enters the drain the float rises off its seat, exposing the orifice and allowing liquid to discharge through the stem.
• Pneumatic Drain - (Requires Pilot Signal) - An external condensate reservoir collects liquid. When the liquid rises to a set point a mechanical switch sends pilot air to an air cylinder that opens a ball valve, draining the reservoir and returning the piston to a relaxed position.
• Electronic Drain - (Requires Electricity) - Incorporates a solenoid valve and an electric timer with two on/off settings. ON is the setting for the amount of time the valve needs to stay open (0.5 to 10 seconds) and OFF is the time between openings (0.5 to 45 minutes).

Premium Materials

Tsunami filters are machined from high-quality 6061 Aircraft Aluminum and then anodized inside and out - providing industrial strength and preventing corrosion and rust.

Oversized Tube Length

Oversized tube length allows both gravity and velocity to assist in the removal of water and air contaminants.

Removable Bottom Cap

The removable bottom cap provides ease of service and the machined drain port allows for various drain options.

Features & Benefits

• Point-of-use protection for air tools and pneumatic equipment
• Machined from 6061 aircraft aluminum
• Minimal maintenance is required with an easy-to-service float drain
• Removes large amounts of moisture (up to one quart of water or oil per minute)
• Filters particulate down to 10 microns
• Available for systems with a flow rating from 20 to 800 CFM
• Optional mounting bracket sold separately
• Made in America