Non-OEM Parts for Sames® 20C50 Airmix® Paint Pump
Non-OEM Parts for Sames® 20C50 Airmix® Paint Pump
TFS offers the Non-OEM parts you need to maintain your Sames® and Kremlin® equipment. We refer to brand names and part numbers of the original equipment manufacturers (OEM) — Sames® Kremlin® SA and Exel Industries SA—to educate you about our products.
If you use Sames® or Kremlin® paint equipment, including spray guns and pumps, you can buy Non-OEM replacement parts from TFS. We sell a variety of high-quality, affordable Non-OEM parts compatible for Sames® and Kremlin® equipment to deliver the superior finishing results you desire.
TFS Non-OEM parts are manufactured specifically for us by independent manufacturers—not by Sames® Kremlin® SA or Exel Industries SA. That is how we are able to provide you the same EXCEPTIONAL quality at a lower price.
We provide Non-OEM parts for the Sames® 20C50 Airmix® Paint Pump to benefit your business.
- Cost-Effectiveness: TFS Non-OEM parts are more affordable than OEM parts, making them an economical choice for businesses looking to reduce operational costs without sacrificing quality.
- Quality and Reliability: Our Sames® 20C50 Airmix® Paint Pump replacement parts meet or exceed industry standards, ensuring reliable performance and longevity.
- Availability: Non-OEM parts are typically more readily available, reducing lead times and ensuring that your equipment is back up and running swiftly, which is critical for maintaining continuous operations.
- Compatibility: Our Non-OEM parts are designed to be fully compatible with the Sames® 20C50 Airmix® Paint Pump, ensuring seamless integration and optimal performance. This compatibility means users can maintain their equipment without worrying about fit or function issues.
- Performance: By providing high-quality replacement parts, we ensure that the Sames® 20C50 Airmix® Paint Pump continues to operate at peak efficiency so you can achieve consistent and high-quality finishes in various applications.
NOTES:
KREMLIN®, AIRMIX®, and Xcite® are registered Sames Kremlin SA or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Sames Kremlin SA or Exel Industries SA or any of their affiliates, and no warranty by Sames Kremlin SA, Exel Industries SA, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Sames Kremlin SA or Exel Industries SA and is not one of their authorized distributors.
Non-OEM Parts for Sames® 20C50 Airmix® Paint Pump - Site Navigation
20C50 Parts Breakdown:
Pump (Part No. 151-770-000):
| Ref No. | Part No. | Description |
| 1 | 146-260-000 | Air motor, model 500-4 |
| 2 | 144-950-000 | Fluid section, model C50 |
| 3 | 051-770-001 | Tie-rod, connecting |
| 4 | 953-010-021 | Nut, HM 10 |
| 5 | 963-040-021 | Washer, MN 10 |
| N/A | 050-311-902 | Protective spring |
| N/A | 151-775-010 | Mounting assembly |
| 6 | 051-770-101 | Plate |
| 7 | 933-011-279 | Screw, model H 8 x 20 |
| 8 | 933-151-147 | Screw, model CHc M 8 x 10 |
| 10 | 151-796-130 | Air supply |
| 11 | 905-150-012 | Elbow, M 1/4 BSP - T 8 x 12 |
| 14 | 88-664 | Washer, model W8 |
| 15 | 963-040-019 | Washer, model MN 8 |
| 16 | 953-010-019 | Nut, model HM 8 |
| 17 | 050-102-437 | Fitting, stainless steel, double male, 1/2 BSP - 26 x 125 |
| 20 | 155-580-300 | AIRMIX® filter 3/8, stainless steel |
| 21 | 055-580-301 | Sleeve, stainless steel MM 3/8 NPT |
| 23 | 049-596-000 | Drain rod, stainless steel, Ø 16 |
Optional:
| Ref. No. | Part No. | Description |
| 15 | 149-596-160 | Suction rod Ø 25 for drum 200L (Length : 1m) |
| 16 | 149-596-152 | Strainer Ø 25 |
Air Motor Model 500-4 (Part No. 146-260-000):
| Ref. No. | Part No. | Description |
| 2 | 046-260-901 | Upper flange |
| 3 | 146-260-902 | Lower flange |
| 4 | 044-570-106 | Guide ring |
| 5 | 144-579-923 | Ring, R 8 bis (x10) |
| 6 | 046-230-005 | Base, reversing-block |
| 7 | 109-420-257 | O Ring (x10) |
| 8 | 933-151-277 | Screw, CHc M 6 x 20 |
| 9b | 144-630-720 | Right reversing-block with two bearings |
| 10 | 930-151-446 | Screw, CHc M 8 x 35 |
| 11 | 050-311-232 | Spring |
| 12 | 044-570-131 | Linkage, female |
| 13 | 044-570-900 | Control fork assembly |
| 14 | 902-202-002 | Retaining ring |
| 15 | 046-180-003 | Rod, driving |
| 16 | 046-144-907 | Nut |
| 17 | 046-180-007 | Rod, piston |
| 18 | 046-180-010 | Seal, ring |
| 19 | 129-400-902 | Seal (x10) |
| 20 | 046-144-901 | Tube,connecting |
| 21 | 000-323-716 | Lower locknut |
| 22 | 046-180-009 | Tie-rod |
| 23 | 963-040-021 | Washer, MN 10 |
| 24 | 953-010-021 | Nut, HM 10 |
| 26 | 046-260-903 | Washer |
| 27 | 046-230-007 | Silencer |
| 29 | 909-420-291 | Seal |
| 32 | 044-570-135 | Cover |
| 33 | 933-151-387 | Screw, CHc M 6 x 30 |
| 40 | 046-260-001 | Cylinder |
| 41 | 000-323-061 | Seal, cylinder |
| 42 | 046-144-908 | Nut, piston |
| 43 | 046-140-002 | Piston |
| N/A | 146-260-990 | Package of seals of the air motor (Ref. 5, 7(x3), 11, 18, 19(x2), 29, 41(x2) + package of seals of the reversing block) |
| N/A | 146-260-995 | Servicing kit (Ref. 4, 43, + package of seals of the air motor + ind. 2, 4, 7, 8, 13 of the reversing block) |
Reversing Block:
| Ref. No. | Part No. | Description |
| 6 | 144-579-912 | Gasket seal (x 10) |
| 7 | 046-170-508 | Base, fixed |
| 8 | 044-570-324 | Base, mobile |
| 9 | 044-570-325 | Pin |
| 10 | 921-140-102 | Spring |
| 11 | 044-571-006 | Stop, spring |
| 12 | 144-579-922 | Ring, model R 10 (x 10) |
| 13 | 144-579-911 | Pin (package of 10 pins + 1 stop Ref. 11) |
| 14 | 144-579-910 | Ring, model R 6a (x 10) |
| 16 | 144-630-415 | Cover |
| 17 | 933-151-277 | Screw, model CHc M 6x20 |
| 18 | 906-333-102 | Plug, model 1/4 BSP |
| 19 | 046-170-510 | Lever, control |
| N/A | 146-270-950 | Package of seals (Ref. 6, 12(x3), 14, 15) |
| N/A | 144-630-425 | Servicing kit - bases (Ref. 7, 8) |
Fluid Section (Part No. 144-950-000):
| Ref. No. | Part No. | Description |
| 1 | 044-950-001 | Upper flange |
| 2 | 044-950-002 | Cylinder |
| 3 | 044-950-003 | Piston |
| 4 | 044-950-004 | Wetting-cup |
| 5 | 044-950-010 | Suction valve assembly |
| 6 | 044-950-215 | Exhaust valve |
| 044-950-011 | Exhaust valve for packing with chevron seals | |
| 7 | 044-950-007 | Wetting-cup, mobile |
| 8 | 050-040-317 | O-Ring |
| 9 | 044-550-029 | Rush |
| 10 | 907-414-242 | Ball Ø 16 (5/8"), stainless steel 440C |
| 907-414-142 | Ball Ø 16, 316 (stainless steel) (optional) | |
| 12 | 044-790-006 | Male washer, polyacetale |
| 13 | 909-150-214 | Seal GT lower (mobile packing) |
| 044-790-007 | Female washer, polyacetale | |
| 14 | 044-790-008 | Chevron seal, PTFEG |
| 15 | 909-051-104 | Chevron seal, PE |
| 16 | 044-790-015 | Set ring, stainless steel (optional) |
| 17 | 907-414-223 | Ball Ø 9,52 (3/8"), stainless steel 440C |
| 907-414-623 | Ball Ø 9,52, 316 (stainless steel) (optional) | |
| 18 | 144-950-100 | Upper packing with GT seal |
| 19 | 044-790 -011 | Male ring, polyacetale |
| 20 | 044-791-012 | Female ring, inox |
| 21 | 909-050-915 | Chevron seal, polyfluid |
| 22 | 044-790-013 | Chevron seal, PTFEG |
| 909-051-103 | Chevron seal, PE | |
| 23 | 144-950-012 | Drain plug |
| 24 | 109-020-401 | Flat seal (x 5) |
| N/A | 144-950-091 | Package of seals (Ref. 8, 9, 10, 13, 17, 19, 21(x2), 22(x3), 24, 25) |
| 144-950-090 | Package of seals (ind. 8, 9, 10, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 25) for packing with chevron seals | |
| N/A | 144-950-096 | Servicing kit (Ref. 5, 6 + package of seals) |
| 144-950-095 | Servicing kit (Ref. 5, 6 + package of seals) for packing with chevron seals |
Air Supply (Part No. 151-796-130):
| Ref. No. | Part No. | Description |
| 1 | 044-910-121 | Pump bracket assembly |
| 2 | 044-910-122 | Pump bracket |
| 3 | 051-751-011 | Air supply bracket |
| 4 | 933-011-196 | Screw, HM 6 x 16 |
| 5 | 953-010-016 | Nut, HM 6 |
| 6 | 963-040-016 | Washer, M 6 |
| 7 | 016-370-500 | Air regulator, 1/4 - 5,5 bar / 79.77 psi |
| 8 | 910-011-402 | Gauge, 0 - 10 bar / 0 - 145 psi |
| 9 | 016-380-500 | Air regulator, 1/4 - 3,5 bar / 50.76 psi |
| 10 | 910-011-404 | Gauge, 0 - 4 bar / 0 - 58 psi |
| 11 | 906-333-102 | Plug, 8 x 13 |
| 12 | 552-436 | Tee, FFF 1/4 BSP |
| 13 | 050-102-213 | Fitting, double male, 1/4 BSP |
| 14 | 050-102-624 | Fitting, double male, 1/4 BSP - 1/4 NPS |
| 15 | 904-523-003 | Fitting, double male, 1/4 BSP - 3/8 BSP |
| 16 | 903-090-209 | Valve, F 3/8 |
| 17 | 903-080-401 | Discharge valve - setting 6.5 bar / 94 psi |
| 18 | 050-231-702 | Adaptor F 1/4 NPS |
| 19 | 050-372-226 | Hose 8 x 12 |
HP Fluid Filter:
| Ref. No. | Part No. | Description |
| 1 | 155-580-200 | Bare filter, stainless steel |
| 2 | 905-210-304 | Plug , stainless steel 3/8 NPT |
| 3 | 906-314-204 | Fitting, double male, 1/4 - 3/8 |
| 4 | 000-750-040 | HP valve FF 3/8 BSP |
| 5 | 050-102-411 | Adaptor, stainless steel, double male 18x125 - 3/8BSP |
| 6 | 905-210-503 | Adaptor, stainless steel, double male, 3/8 NPT - # 5 JIC (1/2 JIC) |
| 7 | 000-161-106 | Screen n° 6 (168 µ - 85 Mesh) |
| 000-161-112 | Screen n° 12 (280 µ - 55 Mesh) | |
| 11 | 055-580-201 | Base, model 3/8 |
| 12 | 055-580-202 | Bowl |
| 13 | 055-280-002 | Nut |
| 14 | 055-190-007 | Stop ring |
| 15 | 055-190-005 | Spring |
| 16 | 150-040-327 | Seal (pack of 5) |
