Spray Pack
Anest Iwata ICON 30:1 Wall Mounted Pump with MAMBA® AAA Spray Gun
Manufacturer: Anest Iwata
Part Number: 140016A0
Description: Our new pump series the Anest Iwata iCon air-assisted pumps are suitable for medium to high-pressure applications. The iCon pumps perfectly meet the spray painting requirements in the general industrial, wood, and metal painting industries, with single or plural component paints. Our Anest Iwata iCon series are extremely simple to assemble, disassemble, and maintain, with our excellent reliability really makes the difference!
What makes this series so Unique?
Our spring-loaded packing sets remove the need for daily maintenance, allowing the pump to last longer between maintenance cycles, and protects the cylinder from wear as the packings are set in place. Our patented air motor valve technologies can work even through critical conditions to provide the best reliability during operations.
Anest Iwata is known for their high-quality products and this system hits every mark!
30:1 Anest Iwata iCon Series:
Some serious jobs require a good partner, and the Multispray versions of the Anest Iwata Icon X-3 series were developed to be your best workmate during long days of painting. The new cart frame design has the wall support mounted inside and it can work both with the Suction Hose or the Hopper to be as versatile as possible and meet your requirements. The Pump is compact and therefore easily transportable, thanks to its new compact filter but at the same time, its 30:1 ratio will allow you to work with the most viscous paints.
FEATURES
- New Delivery Paint Filter TF-1S (w/100 mesh filter)
- Suction Hose with filter or Hopper set (6 lt.)
- All wetted parts in stainless steel
- Fluid valve seats in carbide
- Hard chromed plate surfaces inside
- Self-adjusting V packings
Configuration:
- Anest Iwata ICON PUMP assembled either on Cart Frame or Wall Mount
- 2 Air Pressure Regulators (1 for the pump, 1 for the gun)
- Delivery Paint Filter TF1-S (w/100 mesh filter)
- Suction Hose (w/50 mesh filter)
- or Hopper Set 6 lt. (w/50 mesh filter)
- High-Pressure Twin Hose
- Multi Spray Gun MSGS-200 EVO
Pump Accessories:
04005510 - 6L Hopper Set
ITDA-55G90 - 55g Suction Hose Assembly
TECHNICAL DATA
- PRESSURE RATIO: 30:1
- MAX. FLUID WORKING PRESSURE: 210 bar (21 MPa)
- MAX. AIR INLET PRESSURE: 7.0 bar (0.7 MPa)
- AIR CONSUMPTION: 110 Nl/min. at 30 cyc/min.
- FLUID OUTPUT:
- MAX. FLUID DELIVERY 25 ml
- MAX. VOLUME/MIN. 2.5 l/min.
- MAX. NO. OF CYCLES PER MIN. 100 cyc
Manufacturer: Total Finishing Supplies
Part Number: Mamba
Description: The MAMBA® Mix Tech 200 bar (2900PSI) manual spray gun delivers exceptional performance, value, and finish quality. With a high transfer efficiency, the MAMBA® Mix Tech competes with other much higher-priced Graco® G40 RAC™ and G15 RAC™ spray guns.
Features:
-
Material savings & environmental protection
-
MAMBA® is manufactured by an ISO9000 facility
-
HVLP compliant
-
Unsurpassed atomization and quality of spraying at almost half the price
-
Lightweight and ergonomic design for outstanding performance.
-
Comparable to Graco® G40 RAC™ and G15 RAC™ along with the TriTech Fine Finish Reversible Tips
Reasons to choose the TFS MAMBA® over any other Air Assisted Airless (AAA) on the market:
-
You have high standards and like saving money! MAMBA® Mix Tech delivers Top tier performance at a mid-market price while offering rugged durability and superior atomization.
-
Get more done with less coating and waste! High Transfer Efficiency for Air Assisted Airless! Testing has shown this gun to have 86% transfer efficiency.
Specifications:
Fluid Inlet: NPSM 1/4"
Compressed Air Connection: NPT 1/4"
Max. Material Pressure: 200 bar / 2,900 psi
Max Material Pressure: 131°F (55°C)
Max Inlet Pressure: 8 bar / 116 psi
Operating Temperature Range: 41°–104°F (5°–40°C)
Weight: 1.3lb (0.6kg)
Max Sound Level: 82dB(A)
Literature
- Operating Manual
- Brochure
- Cut Sheet
- Tip Chart
Accessory and Parts List
- TriTech Contractor Tips
- TriTech Ultra-Finish Tips
- Reversible Tip Guard and Retainer/Air Cap
- Non-OEM Tip Sieve Support
- Non-OEM Tip Sieves (85-200 mesh)
- 1/4" M x 1/4" F Swivel
- 25' High-Pressure Fluid Line (select fittings when ordering)
- 25' Air Line
Replacement Part List
- Reversible Tip Guard and Retainer
- Reverse Tip, Ultra Finish
- 2. Wedge
- 3. Fan Regulation Set
- 4. Pressure Wedge
- 5. Fluid Needle Gasket
- 6. Fluid Needle Screw
- 7. Air Valve Complete
- 8. Needle Set
- 9. Air Valve Spring
- 10. Needle Spring
- 11A. Back Cap
- 12. Air Inlet 1/4"
- 13. Pin
- 14. Safety Lock
- 15. Trigger Pin
- 16. Trigger
- 17. Sealing Gasket
- 18. Gun Head
NO DISCOUNT CODES may be applied to this item
NOTES:
Not made by Graco®
Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Graco Inc. and is not one of their authorized distributors. Aftermarket non-oem replacement parts comparable to Graco® brand equipment are not manufactured or warrantied by Graco Inc. or any of its affiliates.
Click here to view other products, parts, & accessories!