Spray Pack
Anest Iwata ICON 30:1 Wall Mounted Pump with VIPER® AAA Spray Gun
Manufacturer: Anest Iwata
Part Number: 140016A0
Description: Our new pump series the Anest Iwata iCon air-assisted pumps are suitable for medium to high-pressure applications. The iCon pumps perfectly meet the spray painting requirements in the general industrial, wood, and metal painting industries, with single or plural component paints. Our Anest Iwata iCon series are extremely simple to assemble, disassemble, and maintain, with our excellent reliability really makes the difference!
What makes this series so Unique?
Our spring-loaded packing sets remove the need for daily maintenance, allowing the pump to last longer between maintenance cycles, and protects the cylinder from wear as the packings are set in place. Our patented air motor valve technologies can work even through critical conditions to provide the best reliability during operations.
Anest Iwata is known for their high-quality products and this system hits every mark!
30:1 Anest Iwata iCon Series:
Some serious jobs require a good partner, and the Multispray versions of the Anest Iwata Icon X-3 series were developed to be your best workmate during long days of painting. The new cart frame design has the wall support mounted inside and it can work both with the Suction Hose or the Hopper to be as versatile as possible and meet your requirements. The Pump is compact and therefore easily transportable, thanks to its new compact filter but at the same time, its 30:1 ratio will allow you to work with the most viscous paints.
FEATURES
- New Delivery Paint Filter TF-1S (w/100 mesh filter)
- Suction Hose with filter or Hopper set (6 lt.)
- All wetted parts in stainless steel
- Fluid valve seats in carbide
- Hard chromed plate surfaces inside
- Self-adjusting V packings
Configuration:
- Anest Iwata ICON PUMP assembled either on Cart Frame or Wall Mount
- 2 Air Pressure Regulators (1 for the pump, 1 for the gun)
- Delivery Paint Filter TF1-S (w/100 mesh filter)
- Suction Hose (w/50 mesh filter)
- or Hopper Set 6 lt. (w/50 mesh filter)
- High-Pressure Twin Hose
Pump Accessories:
04005510 - 6L Hopper Set
ITDA-55G90 - 55g Suction Hose Assembly
TECHNICAL DATA
- PRESSURE RATIO: 30:1
- MAX. FLUID WORKING PRESSURE: 210 bar (21 MPa)
- MAX. AIR INLET PRESSURE: 7.0 bar (0.7 MPa)
- AIR CONSUMPTION: 110 Nl/min. at 30 cyc/min.
- FLUID OUTPUT:
- MAX. FLUID DELIVERY 25 ml
- MAX. VOLUME/MIN. 2.5 l/min.
- MAX. NO. OF CYCLES PER MIN. 100 cyc
Manufacturer: Total Finishing Supplies
Part Number: Viper
Description: The VIPER® manual spray gun uses our Mix Tech spray technology to provide you with exceptional atomization, performance, value, durability, and finish quality. VIPER® is constructed with our aftermarket parts (Non-OEM) manufactured for the KREMLIN® Xcite® gun. The Viper spray gun boasts an 86% transfer efficiency. The VIPER® Mix Tech competes with other much higher-priced European Air Assisted Airless spray guns. VIPER® can be used with water-based or solvent-based coatings with fluid pressures up to 120 bar (1,740PSI).
Features:
-
Material savings & environmental protection
-
VIPER® is manufactured by an ISO9000 facility
-
HVLP compliant
-
Unsurpassed atomization and quality of spraying at almost half the price
-
Lightweight and ergonomic design for outstanding performance
-
Performance comparable to KREMLIN® Xcite® and uses our Non-OEM Aftermarket Standard and Ultra Fine Finish tips, seals, air cap, diffuser, fluid needle and spray gun filter screens
Reasons to choose the TFS VIPER® over any other Air Assisted Airless (AAA) on the market:
-
You have high standards and like saving money! The VIPER® Mix Tech delivers Top tier performance at a mid-market price while offering rugged durability and superior atomization.
-
Get more done with less coating and waste! High Transfer Efficiency for Air Assisted Airless! Testing has shown this gun to have 86% transfer efficiency.
“Why Pay for GOLD when you can save approx. 50% and go GREEN!"
Specifications
|
Fluid Inlet: |
NPSM 1/4” |
|
Compressed Air Connection: |
NPT 1/4” |
|
Max. Material Pressure: |
120 bar (1,740 PSI) |
|
Max. Material Temperatrue: |
55°C (131°F) |
|
Max. Air Inlet Pressure: |
8 bar (116 PSI) |
|
Operating Temperature Range: |
5°–40°C (41°–104°F) |
|
Weight: |
0.6kg (1.3 lb) |
|
Max. Sound Level: |
82dB (A) |
Literature
-
TIP CHART
Accessory Part List
-
Non-OEM Standard Tips 134-5xx-xx4 or 134.5xx.xx4
-
Non-OEM Ultra Series Fine Finish Tips 134-5xx-xx2 or 134.5xx.xx2
-
Non-OEM VX24 Air Cap 132-720-020 or 132.720.020
-
Non-OEM Aftermarket Tip Sieve Support 129.609.90X
-
Non-OEM Aftermarket 140 & 200 Mech Tip Sieves 129.609.90X
-
3/16" High-Pressure Fluid Line (select fittings when ordering)
Replacement Part List:
-
2. Wedge
-
8. Needle Set*
-
10. Needle Spring
-
11B. Back Cap
-
12. Air Inlet 1/4”
-
13. Pin
-
14. Safety Lock
-
15. Trigger Pin
-
16. Trigger
-
17. Sealing Gasket
-
23-1. Mix Nozzle Standard
-
23-2. Air Cap Gasket, 10/pkg
-
23-3. Air Cap (Non-OEM KREMLIN® VX24)
-
24-1 Pre-Atomized Nozzle (Ultra Tips)
- 120 Bar Needle Kit, Complete
*= Included in 120 Bar Needle Kit, Complete
NO DISCOUNT CODES may be applied to this item
NOTES:
KREMLIN®, AIRMIX®, and Xcite® are registered trademarks of Sames Kremlin SA or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Sames Kremlin SA or Exel Industries SA or any of their affiliates, and no warranty by Sames Kremlin SA, Exel Industries SA, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Sames Kremlin SA or Exel Industries SA and is not one of their authorized distributors.
Click here to view other products, parts, & accessories!