Cerakure Nano Infrared Curing Oven

Nano Infrared Curing Oven

Manufacturer: Cerakure

Part Number: Nano

Description: Cure Cerakote in 20 Minutes. Not 2 Hours. The Cerakure Nano is a catalytic infrared curing oven built specifically for Cerakote applicators. It cures coatings directly — not the air, not the part — reducing cure times from hours to minutes with dramatically less energy.

This is not a faster convection oven.
It’s a different process entirely.

Why the Nano Is Faster

Traditional convection ovens heat air, then heat the part, and eventually cure the coating.
The Nano does none of that.

Using catalytic infrared energy, the Nano targets the coating itself — exciting it directly in the optimal wavelength range. The result is a full cure in a fraction of the time, without overheating the substrate.

Typical comparison:

• Convection oven: ~2 hours @ 250°F
• Cerakure Nano: ~20 minutes
  

Once you experience it, waiting two hours feels unnecessary.

Power & Efficiency

Speed doesn’t require brute force. The Nano operates on:

• 120V / 2A
• ~6,000 BTU
• Standard electrical outlet
• Standard gas bottle
  

Because energy is delivered directly to the coating, there’s very little waste. You’re not heating an oven full of air — you’re curing parts efficiently and intentionally.

Intelligent, Operator-Proof Controls

The Nano is designed to be as difficult to mess up as possible.

Every unit includes a dedicated wireless tablet that allows you to control the oven from anywhere in your shop.

Built-in features include:

• Pre-loaded Cerakote recipes
• Pre-loaded cure times
• Automatic start sequences
• Automatic hold functions
• No tuning, calibration, or guessing
  

You press Start. The oven handles the rest. Even if someone else runs it, the results stay consistent.

Wireless Control

The Nano operates on a local wireless system, allowing full control without standing in front of the oven.

• Monitor and control from anywhere in the shop
• No cables
• No network configuration
• No subscriptions
  

Simple, reliable, and purpose-built for real shops.

Designed for Cerakote Applications

The Nano was built specifically for:

• Cerakote applicators
• Firearms and small-parts shops
• High-mix, small-batch workflows
  

It is not intended for:

• Wood finishing
• Large panels
• Conveyor or production-line curing
  

What’s Included

• Cerakure Nano catalytic IR oven
• Wireless control tablet
• Gas hose with regulator and bottle connector
• Pre-configured and ready to run
  

No assembly. No sourcing parts. No setup frustration.

Why Cerakote Shops Choose the Nano

• Faster turnaround
• Less energy consumption
• No bake queues
• No overnight waits
• More predictable scheduling
  

When curing takes 20 minutes instead of two hours, the entire workflow changes.

Specifications:

Exterior Dimensions	24” x 22” x 30”
Interior Dimensions	23.5” x 21.5” x 24”
Power	120V 3amp
Gas Type	Liquid Propane or Natural Gas ¼ PSI, 2,660 BTU
Catalytic element:	8"
Exhaust	4"

 

You will be contacted with a freight quote for shipping. Forklift may be required at time of delivery

Cerakure Energy Chart