Automatic VIPER-X® Air Assisted Airless Spray Gun
Manufacturer: Total Finishing Supplies
Part Number: Auto VIPER-X®
Description: Automatic VIPER® AAA Gun
Features:
-
Material savings & environmental protection
-
Auto VIPER-X® is manufactured by an ISO9000 facility
-
HVLP compliant
-
Unsurpassed atomization and quality of spraying at almost half the price
-
Lightweight and ergonomic design for outstanding performance
-
Performance comparable to KREMLIN® AVX® and ATX ® and uses our Non-OEM Aftermarket Standard and Ultra Fine Finish tips, seals, air cap, and diffuser
Reasons to choose the TFS Auto VIPER-X® over any other Automatic Air-Assisted Airless (AAA) gun on the market:
-
You have high standards and like saving money! The Auto VIPER-X® Mix Tech delivers Top tier performance at a mid-market price while offering rugged durability and superior atomization.
-
Get more done with less coating and waste! High Transfer Efficiency for Air Assisted Airless! Testing has shown this gun to have 86% transfer efficiency.
“Why Pay for GOLD when you can save approx. 50% and go GREEN!"
Specifications
|
Fluid Inlet: |
NPSM 1/4” |
|
Compressed Air Connection: |
NPT 1/4” |
|
Max. Material Pressure: |
200 bar (2,900 PSI) |
|
Max. Material Temperatrue: |
50°C (122°F) |
|
Max. Air Inlet Pressure: |
6 bar (87 PSI) |
|
Operating Temperature Range: |
5°–40°C (41°–104°F) |
|
Weight: |
820g (1.8 lb) |
|
Max. Sound Level: |
80dB (A) |
Literature
-
TIP CHART
Accessory Part List
-
Non-OEM Standard Tips 134-5xx-xx4 or 134.5xx.xx4
-
Non-OEM Ultra Series Fine Finish Tips 134-5xx-xx2 or 134.5xx.xx2
Replacement Part List:
-
23-1. Mix Nozzle Standard
- 24-1 Pre-Atomized Nozzle (Ultra Tips)
- Non-OEM Aftermarket 100 & 140 Mesh Tip Sieves 129.609.90X
- Compatible o-ring Teflon tip seal 129.529.903
- Aftermarket non-OEM diffuser kit 120.729.907
- Non-adjustable fan pattern air cap 132.670.940 VX114
- Adjustable fan pattern air cap 132.670.920 VX14
- Diffuser o-ring seal 150.040.329
- Needle Seal Seat Packing
- Needle Seal Seat
- Needle Seal Seat Nut
- Pattern Adjusting Set Seal Screw
- C092-O ring (Ø11.2xØ1.8)
- C092-O ring (Ø6.3xØ1.8)
- Needle rod
- Needle rod screw
- Adjustment knob guide
- Adjustment knob set
- Needle spring 1
- Needle spring 2
- Complete cartridge type AVX
- Gun body
- Body base
- Fluid base
- Air hole seal
- Fluid hole seal
- Gun body lock screw
- Fluid base lock screw
- Located screw packing
- Located screw
- Quick pipe coupler
- Air connector
- Air adjusting valve
- O ring (Ø26xØ3.5)
- Fluid elbow pipe
- Fluid hole seal screw
NO DISCOUNT CODES may be applied to this item
NOTES:
KREMLIN®, AIRMIX®, AVX® and Xcite® are registered trademarks of Sames Kremlin SA, SAMES or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Sames Kremlin SA, SAMES or Exel Industries SA or any of their affiliates, and no warranty by Sames Kremlin SA, SAMES, Exel Industries SA, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Sames Kremlin SA, SAMES or Exel Industries SA and is not one of their authorized distributors.
Click here to view other products, parts, & accessories!
Warranty:
1 year MFG warranty from MFG defect.
Guns are not returnable once it has been loaded with paint.
Comparable to: