SATAjet X 5500 PHASER

Manufacturer: SATA

Part Number: 1096XXX

Description: The PHASER paint spray gun was developed with its special visual appearance, special materials and a special concept for your very special projects. The unusually elegant design was developed in cooperation with the Porsche Design Studio. Technically, the PHASER is identical to the top model SATAjet X 5500. It has the same nozzle concept and all the other convincing features that make the SATAjet X 5500 an outstanding paint spray gun.

The concept of this nozzle system is easy and straightforward to understand: Both proven application technologies—HVLP and RP—remain available, but now each of them offer the additional choice between I and O-nozzle sets. In line with the increasing nozzle sizes within each of the respective technology (HVLP / RP), the material flow rate increases with constant increments too. Which means that the spray fan size and width remain unchanged across the entire nozzle spectrum. In essence, end-users can now rely on a transparent and consistent system which offers them clear and well-structured application options.

Product Benefits:

• Revolutionary- The X-nozzles are taking atomization to a whole new level

• Noticeably quieter

• Optimized material distribution for enhanced spraying uniformity and atomization with both spray fan shapes

• Low maintenance, No air distribution ring, easier and faster cleaning process

• Efficient: The optimized atomization makes for considerable material savings

RP Technical Data

Inlet Pressure: Operating Range (Field Of Application): 7 PSI–34 PSI

Compliant: Max. 29 PSI

Air Consumption At 29 PSI: 10 CFM

Spray Distance Operating Range: 3.9–8.2"/Recommended 6.6–8.2"

HVLP Technical Data

Inlet Pressure: Operating Range (Field Of Application): 7 PSI–34 PSI

Compliant: Max. 29 PSI

Air Consumption At 29 PSI: 15 CFM

Spray Distance Operating Range: 3.9–8.2"/Recommended 3.9–5.9"

Nozzle Types

I Nozzle: The I-nozzles produce a parallel spray fan pattern with a minimal dry zone and a drier center, which is ideal for painters preferring a reduced application speed and maximum application control during the painting process. The film build per coat in comparison to an O-nozzle of the same size is slightly reduced.

• Parallel spray fan with minimal dry zone

• Improved control during application

• Reduced film build per coat compared to the nozzle set currently in use or the O-nozzle Improved control during application

O Nozzle: O-nozzles do have an oval-shaped spray fan pattern with a larger dry zone and a wet core to accommodate increased application speed at the expense of slightly less application control during the painting process. The film build per coat in comparison to an I-nozzle is slightly higher.

• Oval-shaped spray fan with larger dry zone

• Wet core for increased application speed

• Film build per coat slightly higher compared to the I-nozzle