Hosco PDHC SST Jacketed Hose Assembly (Various Options)

PDHC SST Jacketed Hose Assembly (Various Options)

Manufacturer: Hosco

Part #'s: PDHC-XX-XX-XXX

Description: 

• Part # PDHC-06-AA-072
• Part # PDHC-06-BB-120
• Part # PDHC-06-GG-016
• Part # PDHC-06-GG-018
• Part # PDHC-06-GG-024
• Part # PDHC-06-GG-036
• Part # PDHC-06-GG-048
• Part # PDHC-06-GG-072
• Part # PDHC-06-GG-168
• Part # PDHC-06-GG-540
• Part # PDHC-08-GG-018
• Part # PDHC-08-GG-1420
• Part # PDHC-08-GG-1600
• Part # PDHC-08-TT-014
• Part # PDHC-08-TT-030
• Part # PDHC-08-TT-072

Hosco Stainless Steel Wire Braided Hose Assemblies come completely finished and ready to install into applications in the Pump Room or out at the booth side. The sizes range from 1/4” up to 2” nominal sizes (actual ID size is slightly smaller), with an array of end fittings (JIC(F), NPT(M), Sanitary clamps, and 3/8” OD or ½” OD Tube Stub and Sweeps plus 3/8” NPS(M) or (F) on some smaller sizes in smooth bore version are most common. Convoluted hoses are rated for a vacuum service, therefore good for pump suction hoses, have a much smaller bending radius and greater hoop strength to resist kinking or high suction collapse. Smooth bore hoses are more economical due to thinner wall (less PTFE material used) and simpler design, but are susceptible to kinks in the larger sizes in a dynamic (moving) application. Hosco provides FireHyde hoses in the smooth bore conductive core hoses up to -10 hose sizes to replace rigid steel tubing for fluid supply or
return lines. The hoses can be installed in about ½ the time of rigid steel tubing, and can be quickly and easily relocated to another dispense point if necessary. Hosco FireHyde series of hoses in the 3/8”, ½”, and 5/8” sizes have been certified to meet the FM 6036 Fire test and maintain pressure strength and containment. 

Features:

High Working Pressure Rated
•Smaller hoses rated to over 2000 PSI WP, and largest hoses rated to 800 PSI WP or 14” HG Vacuum for suction lines
Wide Array of Sizes
• From 1/4” to 1 1/4” in smooth bore (PDH/PDHC) and from ¾” to 2” in convoluted (PSH/PSHC), plus conductive core option for grounding concerns.
•Can fabricate in lengths to 100 feet
Wide Array of Connection Types
•from 1/4” to 2” in all common connection types (NPT/) male or female ends, JIC(F), NPS(M) or NPS(F), Sanitary Clamp or Tube Stub available
FireHyde Options
•To replace conventional rigid tubing in flammable or hazardous materials while retaining safety and industry certification

Hoses are NOT Returnable

Binks, which Hosco is a part of, charges a significant fee to drop ship orders of less than $250.00. Therefore, any parts orders under $250.00 will be added to our stocking orders and then reshipped to you. If you need these products faster you can contact us for an expedited drop shipping fee.

Contact: 503-545-3176